Reliable Solar Mounting Structure Price List: Quote Factors

A solar mounting structure price list is only useful once four things are fixed: the structure type, the material, the design basis and the quantity. Change any one of them…

A solar mounting structure price list is only useful once four things are fixed: the structure type, the material, the design basis and the quantity. Change any one of them and the price moves, sometimes by a wide margin. That is why a single rand-per-kW figure copied from one project rarely holds on the next.

This article sets out what drives a quote for rooftop, ground-mount, carport and floating structures. Axe Struct (Pty) Ltd manufactures and wholesales solar PV mounting structures in South Africa for all four applications, serving installers and distributors across the solar industry. The aim here is to let you read a quote line by line and compare it with others on the same terms.

Solar Mounting Structure Supplier Zambia: Sourcing Guide

Solar Mounting Structure Pricing Factors: What a Quote Covers

A complete quote breaks the price into lines you can check. The usual ones are:

  • materials (steel or aluminium sections, plate, rail, clamps)
  • fabrication (cutting, punching, welding, assembly)
  • coating (hot-dip galvanising or anodising)
  • fasteners and connectors
  • design documents and engineering sign-off
  • packing and freight

If a quote shows one lump sum for all of these, you cannot tell which line moved when you compare it with a second supplier. Ask for the split.

The inputs that set the total are structure type, material, design wind basis, span and layout, coating, order quantity and delivery point. Publishing them lets a buyer test a quote against the project drawings. A rooftop rail system on a sheet-metal roof and a ground-mount frame on driven piles share a module, but they share very little else in the bill.

Unit prices appear in this article only where they are checked against a current rate card, and none are quoted here. Rates move with steel and aluminium markets, so a figure printed on a web page today can be wrong by the time a purchase order is raised. For the line items a full scope has to cover, see the bill of materials for EPC scope. If you are still choosing between structure types, the solar buyer’s overview of mounting system solutions gives the category context first.

Steel vs Aluminium: Where the Cost Difference Comes From

Neither metal is cheaper in every case. The steel vs aluminium cost difference depends on the application and on the member size the design requires, not on the price per kilogram alone.

Material Price Versus Structural Weight

Raw-material price per kilogram is the number buyers compare first. It is also the least complete number, because a structure is bought by the member, not by the kilogram.

Aluminium has roughly one-third the density of structural carbon steel, about 2.7 g/cm³ against 7.85 g/cm³. Its elastic modulus is also only about one-third of steel’s, around 70 GPa against 200 GPa. So where deflection or stiffness governs the design, an aluminium member may need a deeper or thicker profile to match a steel one, and the weight saving narrows. Where strength or handling weight governs, the lighter section keeps more of its advantage.

The result is that a higher price per kilogram can still produce a competitive member, and a lower one can produce a heavier, costlier one. Check the quoted weight per metre alongside the price. The exact alloy matters too, so confirm values against the alloy named in the quote.

Fabrication, Finish and Application Fit

Fabrication effort differs by material. Steel is cut, punched and welded in conventional workshops and then coated. Aluminium is usually extruded to a profile, which carries die cost but gives a lot of design freedom, and it is typically joined with fasteners and connectors rather than site welds.

Finish follows from that. Steel needs a protective coating, so galvanising becomes a cost line. Aluminium is corrosion resistant by nature and may be left mill finish or anodised if the specification calls for it.

Application fit then narrows the choice:

  • Rooftop: low self-weight on the roof structure often favours aluminium rail.
  • Carport: long spans and canopy loads usually favour steel frames.
  • Ground mount: steel is common where posts, piles and long members carry the load.
  • Floating: corrosion exposure and handling weight shape the material choice.

Every quote should state the steel grade, or the aluminium alloy and temper, because two quotes that both say “aluminium” can mean different strengths. The aluminium structure specifications cover that detail.

Galvanising and Corrosion Protection

On a steel quote, hot-dip galvanising is often a separate line. Buyers who compare only the fabricated-steel price can miss it, and then find one supplier looks cheaper because the coating was never included.

Hot-dip galvanised coatings on fabricated steel are specified under ISO 1461. The standard sets minimum coating requirements that depend on the steel thickness, so the coating can be written into the quote and checked on delivery. Ask for the standard and the required thickness to be stated, not just the word “galvanised”.

Coastal and high-humidity sites justify a heavier corrosion specification, and that adds cost. A site near the sea in Durban or Cape Town is a different case from an inland, dry-climate roof. If you are pricing both, expect the coating line to differ even when the steel is identical.

A heavier coating does not make up for poor detailing. Trapped moisture at joints and unprotected cut edges still corrode, so the quote should also show how fasteners are protected.

Wind Zone and Span: How Structural Loads Set Member Size

Wind zone, mounting height and span shape the load case. The load case sets member size, bracing and foundation work, and those three lines are most of what separates a cheap structure from an expensive one.

Wind Zone, Mounting Height and Site Exposure

Design wind speed, terrain exposure and mounting height together set the wind load on the array. A flat open farm site and a sheltered urban roof can share the same module and need very different structures.

South African wind design for structures is commonly carried out to the SANS 10160 series, or an accepted equivalent. Each quote should therefore state the wind basis it assumes, including the design wind speed and terrain category. If two quotes assume different wind bases, their prices are not comparable, however similar the drawings look.

Mounting height matters most on rooftops and carports, where the array sits above ground level and catches more wind at the edges. You should confirm the wind basis with the project engineer before you request prices.

Span, Post Spacing and Member Count

Longer spans and wider post or pile spacing raise the bending demand on rails and beams. Members must then get bigger, or bracing must be added, or more posts must be installed. Each choice changes cost in a different place.

Wider spacing saves on posts and foundations, but it needs heavier members between them. Tighter spacing does the reverse. The cheapest layout is the one where both sides balance for the actual site, and that depends on soil, roof structure and wind.

Carports show this most clearly, because the span is part of the usable parking layout. The carport frame load requirements explain how span drives member size there.

To make sure suppliers price the same structure, send the module weight and dimensions along with the layout. A quote built on a 22 kg module will not match one built on a heavier one.

Bulk Mounting Structure Quotes: How Order Volume Changes Unit Cost

Order volume lowers unit cost because set-up, tooling and inspection are spread across more pieces. A repeated standard design therefore prices differently from a custom run.

How Volume Lowers the Per-Unit Price

A repeat order of one standard rail profile is set up once and then run across many pieces. Material utilisation improves too, since longer runs leave less offcut waste per piece.

A custom profile needs its own set-up and inspection each time it changes. That cost lands on every change, so a project with many bespoke parts carries set-up cost many times over.

Volume does not rescue a design that is wrong for the site. A large order of the wrong profile is still the wrong profile, and it does not make a custom requirement cheaper to produce.

Wholesale PV Hardware Pricing for Distributors and EPCs

Distributors and EPC buyers need more from a bulk quote than a unit price. Wholesale PV hardware pricing is easier to compare when the quote states:

  • whether prices are tiered by quantity, and where the tiers break
  • whether pricing applies per project, per batch or per stock order
  • the lead time for each batch
  • the delivery split, if the order ships in several drops

Without these, two bulk quotes can show the same unit price and still cost very differently once batches and deliveries are counted. A stock order released in monthly batches also ties up less working capital than one delivered all at once, if the supplier agrees to hold it.

The bulk order checklist sets these points out as a list you can work through before you place an order.

Solar Structure Quotes in South Africa: Delivery and Exchange Rates

Freight depends on whether the order ships within South Africa or into a neighbouring market such as Namibia or Botswana. Cross-border orders add distance, paperwork and sometimes a different delivery split, so state the delivery point when you ask for a price.

Lead time depends on batch size and coating schedule. A large batch takes longer to fabricate, and galvanising adds its own queue on steel orders. The manufacturer lead times in South Africa page holds the detail this section only summarises.

Where inputs are imported, exchange-rate moves can change cost between the quote date and the order date. That is why every quote should carry a validity period and the delivery point it assumes. A quote with neither is an estimate, not a price you can hold a supplier to.

For regional price context beyond this article, the South African price list guide covers the same ground from the local angle.

Mounting Structure Cost per kW: Comparing Quotes Like for Like

Mounting structure cost per kW is the quote total divided by installed DC capacity in kWp. A 500 kWp project quoted at one total gives a per-kW figure by simple division, and that figure is handy for a first screen.

It compares fairly only when module wattage, layout and structure type match across quotes. A carport structure and a ground-mount structure will never share a cost per kW, because the carport carries a canopy and longer spans. Higher-wattage modules lower the structure cost per kW on the same frame, since fewer modules and fewer mounting points are needed for each kWp.

This figure also says nothing about what is in the quote. A low cost per kW with no coating, no design documents and no freight is not low. Strip each quote back to the same lines first, then divide.

What to Send With a Direct Quote Request

A supplier can price the same structure as everyone else only if it receives the same inputs. Send these:

  1. Application: rooftop, ground-mount, carport or floating.
  2. Module count and size, including wattage, dimensions and weight.
  3. Design wind basis, such as SANS 10160 or an accepted equivalent.
  4. Span and tilt, where they apply.
  5. Material and coating, including steel grade or aluminium alloy, and the galvanising specification.
  6. Quantity, and whether it is per project, per batch or per stock order.
  7. Delivery point.

With these in hand, the quote covers the structure you actually need, not a generic one. Axe Struct accepts direct quote requests from installers, EPC contractors, wholesalers and project developers, and the steps are set out under how to request a manufacturer quote.

Frequently asked questions

Is aluminium or steel cheaper for a solar mounting structure?

Neither is cheaper in every case. Aluminium has a lower density but also about one-third of steel’s stiffness, so stiffness-governed members can need larger profiles. Compare the quoted weight per metre, finish and member size for your application, not just the price per kilogram.

Why is galvanising listed separately on a steel quote?

Hot-dip galvanising is often priced as its own line because it is a separate process after fabrication. It is specified under ISO 1461, with minimum coating requirements that depend on steel thickness. Ask for the standard and thickness to be written into the quote so you can check it on delivery.

How do I calculate mounting structure cost per kW?

Divide the quote total by the installed DC capacity in kWp. The result only compares fairly when module wattage, layout and structure type match across quotes, and when each quote includes the same lines such as coating, design documents and freight.

What should a bulk quote for distributors or EPCs show?

It should state whether pricing is tiered by quantity, whether it applies per project, per batch or per stock order, the lead time for each batch and the delivery split. It should also carry a validity period and an assumed delivery point.

Why does a quote have a validity period?

Where inputs are imported, exchange-rate moves can change cost between quote and order. The validity period sets how long the quoted price holds. The assumed delivery point matters for the same reason, because freight differs between South Africa and neighbouring markets such as Namibia or Botswana.