South Africa: +27 10 880 0220 | Germany: +49 1579 2360269 | Kenya: +254 723 154900 | Madagascar: +261 34 53 335 51

Ground Mount Vs Floating Solar Structure Cost Comparison
Floating solar structures usually cost more per kW than ground mount structures. The gap comes from floats, mooring and water-side access, none of which a land site needs. How large…
Ground Mount Vs Floating Solar Cost Comparison
This article compares ground mount vs floating solar structures from a structural. Floating solar structures usually cost more per kW than ground mount structures. The additional cost comes from floats, mooring systems, and water-access infrastructure that land-based installations do not require. The actual cost difference depends on site conditions, project size, and the scope included in each quotation.
This article compares ground mount vs floating solar structures from a structural perspective only. It examines anchoring methods, buoyancy requirements, material selection, maintenance access, and site-specific considerations. Developers evaluating different installation options can also review this guide to rooftop, ground and floating mounting types.
Floating solar structures usually cost more per kW than ground mount structures. The gap comes from floats, mooring and water-side access, none of which a land site needs. How large the gap is depends on the site, and on how both quotes are scoped.
Ground Mount Vs Floating Solar.This article compares the two head-to-head on the structure only. It covers anchoring, buoyancy, materials, maintenance access and site factors. Developers still choosing a category can start with the overview of rooftop, ground and floating mounting types.
How to set up a like-for-like solar structure cost comparison per kW
A PV structure cost per kW figure only means something when both options are priced on the same basis. The basis used here is total installed structure cost divided by DC kWp.
Installed structure cost includes:
- frames and fixings
- foundations (ground mount) or mooring (floating)
- float units (floating only)
- installation labour
- access provisions
- freight to site
Modules, inverters, cabling, and land or water rights are excluded. Each of these is shown as its own line, so the structure comparison stays clean.
Axe Struct (Pty) Ltd is a South African manufacturer and wholesale supplier of solar PV mounting structures. It produces ground mount and floating solar structures for installers, EPC contractors and distributors, so both options can be priced from one supplier on one set of inputs.
The basis is DC kWp, not AC output. A 1 MWp array behind an 800 kW inverter has a different cost per kW depending on which figure sits in the denominator.
This method has a limit. It gives a structure cost per kW, not a project cost per kW, and it says nothing about whether a floating array pays back faster than a land array. Energy yield, financing and site rights sit outside the structure line.
Ground mount and floating solar structure cost, line by line
The table below lists the same cost lines for both options. The right-hand column gives the direction of floating solar relative to ground mount. It shows direction only, because fixed figures need a dated, sourced quote for a specific site.
| Cost line | Floating vs ground mount | Reason |
|---|---|---|
| Frame supply | Similar | Both need a frame that carries the modules at the design tilt |
| Foundations or mooring | Higher | Anchor lines are sized for water depth, bed type and level range, against piles sized to a soil test |
| Float units | Higher | Ground mount has no equivalent line |
| Installation labour | Higher | Assembly, launching and connecting floats add steps |
| Access provisions | Higher | Walkways and boat access replace a graded vehicle track |
| Site works | Lower | No grading, though shore-side works still need pricing |
| Freight | Higher | Float volume adds bulk to the load |
Two lines can narrow the gap. Hard or rocky ground can make piling expensive on land, and a stable reservoir with a small level range keeps mooring simple. On those sites the premium for floating is smaller.
The two ground mount lines most often disputed are foundations and labour. The ground mount installation guide sets out the sequence behind them.
Common errors when comparing per-kW quotes
Most bad comparisons come from the inputs, not the arithmetic. Four errors show up repeatedly:
- AC and DC kW mixed together. One bid divides by DC kWp and the other by inverter AC capacity. The per-kW figures cannot be compared.
- Scope gaps. One bid includes piling or mooring and the other leaves it to the client. The cheaper bid is then simply the smaller scope.
- Different design loads. Wind and wave loads change member sizes, pile depth and mooring capacity. Two quotes on different loads are two different products.
- Different delivery points, currencies or pricing dates. Freight to a port and freight to site are not the same line.
A South African structure price list can serve as a benchmark for the frame line. It does not replace a site-specific quote for foundations or mooring.
Anchoring and buoyancy: land foundations versus water floats and mooring
Anchoring is where the two options differ most. Take two sites with the same DC capacity as a scenario. The reservoir site needs anchor lines sized for its full level range, plus walkways for float inspection. The land site needs piles sized to the soil test, plus vehicle access for maintenance. The same kWp can therefore carry very different structure costs.
Foundation and mooring scope should come from site testing and a loads study. A standard schedule carried over from another site is not a basis for pricing.
Ground mount foundations: piles and ballast
Ground mount foundation scope follows geotechnical testing. Pile embedment depth and pull-out resistance set the number and length of piles, and therefore the foundation cost per kW. Soft or variable soil needs deeper embedment, while firm soil needs less.
Ballast replaces piles where ground conditions prevent driving, for example on shallow rock or on capped land where penetration is not allowed. Ballast trades pile cost for concrete or block tonnage, plus the handling and freight that come with it.
A pile count taken from a different site is a common source of both over-pricing and under-design. The ground-mount cost factors page goes further into the land-side drivers.
Floats and mooring: how buoyancy sets the floating scope
On water, the structure scope is set by buoyancy and restraint. Float count follows frame weight and design loads, because every kilogram of frame and module must be carried with margin. Mooring then follows wind and wave loads, water depth, bed type and the reservoir’s level range.
Level range matters more than most first estimates assume. A reservoir that drops several metres in a dry season needs mooring that keeps the array in position across the whole range. The array must not drift, ground out or load the anchors unevenly.
Reservoir solar structure cost is therefore set mainly by float count and mooring. A shallow, sheltered, stable-level reservoir sits at the low end. A deep, exposed reservoir with a wide level range sits at the high end, even at identical kWp.
Developers sourcing for water-based projects can review floating solar structure suppliers in Africa for supplier context.
Structural materials: steel and aluminium frames on land and water
Material choice changes the frame price, and on water it also changes the float and mooring bill. Frame weight feeds float count, and float count feeds mooring load.
Galvanised steel for ground mount frames
Galvanised steel is widely used for ground mount frames. On land, tonnage and coating drive the cost. Steel weight matters for freight and handling but does not need to be carried by anything buoyant, so the weight penalty is small.
Coating thickness should match the corrosion exposure. A coastal site or a site with aggressive soil needs a heavier coating specification than an inland site. Quotes that list steel tonnage but not coating specification cannot be compared.
Aluminium frames and corrosion control for floating arrays
Aluminium is much lighter than steel, and it is often chosen where float count is the constraint. A lighter frame needs less buoyancy, which can reduce float units and the load on the mooring. The saving shows up in those two lines even where the aluminium frame costs more per kilogram.
Water adds its own corrosion exposure. Splash, humidity and, on some sites, brackish or chemically active water all attack fixings and joints. Corrosion control means specifying compatible fasteners and isolating dissimilar metals where they meet.
Aluminium is not automatically the better choice on water. Where a site has low corrosion risk and the float design carries the extra weight easily, a steel-based frame can be the cheaper total. The aluminium vs steel mounting comparison covers the trade-off in more detail.
Maintenance access and recurring cost on each site type
Maintenance access is easy to leave out of a head-to-head comparison. It is a recurring cost on both sites, so it should be priced on both sides and carried across the asset life.
Each quote should also state the inspection interval it assumes. A quote that assumes annual float inspection and one that assumes quarterly inspection do not carry the same recurring cost.
Walkways and boat access on water
On water, access starts with walkways between array sections, which let technicians reach modules and connections without a boat. Boat access covers the rest: reaching the array edge, inspecting moorings and recovering a section if one needs repair.
Float and mooring inspection is the recurring item with no land equivalent. Anchor lines, connectors and floats all need periodic checks, and the level range of the reservoir affects how often lines need re-tensioning or adjustment.
Vehicle access and drainage on land
On land, access means a track that carries a service vehicle to the array. Drainage matters because water running along or under the rows can undermine foundations. Vegetation control under the rows is the other recurring line, since growth can shade modules and, in dry conditions, add a fire risk.
None of these items is large alone. Over the asset life they add up, and a land quote that leaves them out looks cheaper than it is.
Land vs water solar project cost: site selection factors
Structure cost is one part of the land vs water decision. The site itself brings costs that sit outside the per-kW structure figure but still change the project answer.
Land-based projects carry a land lease or purchase cost. Water-based projects carry reservoir-use rights instead, agreed with the reservoir owner. Water-based projects also need shore-side cable routing from the array to the land connection point, which has no equivalent on a land site.
Grid connection distance should be compared on both sides. A floating array close to a substation can beat a land array that sits far from one, and the reverse is also true.
Some reservoir owners value the lower evaporation a floating array can provide. That benefit can offset part of the structure premium, but it depends on the owner and on the reservoir, and it should be agreed in writing rather than assumed.
Permits and approvals for reservoir and dam sites
Permits and environmental approvals can add time and cost to dam and reservoir sites. The effect is on schedule as well as price, because a project that waits on approvals carries its development cost for longer.
The approvals needed depend on who owns the water body and what it is used for. A reservoir that supplies drinking water or irrigation involves different parties from an industrial process pond. Developers should confirm the approval route with the owner and the relevant authority before fixing a structure budget.
Requesting structure quotes for both site types
A valid head-to-head needs identical inputs on both sides. Developers can request a solar mounting structure quote from Axe Struct for both options, using the same data for each.
The input list for a like-for-like request:
- DC kWp for the array
- Site type: ground mount, floating, or both
- Soil test data for land, or water depth, bed type and level range for water
- Design loads, including wind and, for floating, wave loads
- Access requirements: vehicle track, walkways, boat access
- Delivery point
- Currency
- A 2026 pricing date
With these inputs, the two quotes use the same basis and the per-kW figures can be compared directly.
Frequently asked questions
Is floating solar always more expensive per kW than ground mount?
Usually, but not always. Floats, mooring and water-side access add scope that a land site does not have. The gap narrows where land has hard ground that makes piling costly and the reservoir is shallow, sheltered and has a small level range.
What is included in PV structure cost per kW?
It is total installed structure cost divided by DC kWp. That covers frames, foundations or mooring, float units where relevant, installation, access provisions and freight. Modules, inverters, cabling and land or water rights are excluded.
Why does reservoir level range affect mooring cost?
The mooring must hold the array in position across the full range of water levels. A wider range needs longer or more complex anchor lines. Two reservoirs with the same kWp can therefore have very different mooring costs.
Does a lighter aluminium frame lower floating solar structure cost?
It can. A lighter frame needs less buoyancy, which can reduce float count and mooring load. The saving depends on the site, so compare total structure cost rather than frame price alone.
What information is needed to get comparable quotes for both site types?
Supply the DC kWp, site type, soil data or water depth and level range, design loads, access requirements, delivery point, currency and a 2026 pricing date. Using the same inputs for both quotes keeps the per-kW figures comparable.



